Skip to end of metadata
Go to start of metadata

When do we use this?

This article is a Technical overview of the nightly AutoNotice script that notifies users of violations and to send out Step #1 collections notices.

See also Automatic Violation Notice  

Setting Up 

  1. Send an email to the offenders primary driver that they have a new violation. Generally you would issue the ticket on the same day as the violation.
  2. Set a flag in preparation for collections. (If the violation is older than AutoNoticeDays)
    1. If the violations connected user is primary driver and has an email address 
      1. send an email and flag appropriately (AutoNotice = 1)
      2. set Violation.AutoNotice to 1
    2. If the violations attached to the user are for the primary driver and they have no email
      1. set flag to be added to the Letter Report (2)
      2. set Violation.AutoNotice to 2
  3. 30 days after items are tagged with either 1 or 2 Violation.AutoNotice and that have an associated Violation Notice will appear on the "send to collections" report
    1. that report allows the administrator to select who/which items will be sent to collections

Technical Note

In the past, violations were marked as 1=email, 2=letter; however in the script, the 2=letter was converted to 1=email so that they would not come up again as needing a letter.
changed it to a 99 when letter is sent; so 99=final stage (or letter printed/sent)



OperationsCommander parking and security management platform