Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

Step-by-step guide

  1. Make sure printer is in Bluetooth Mode. This is done by powering on the unit. If "Bluetooth mode" isn't shown on the LED indicator please hold down both the power and feed buttons for 5 seconds at which point the printer will enter mode selection. From this point click feed or power to cycle the mode. Once you have Bluetooth mode selected hold down the power and feed buttons for another 5 seconds to enable that mode. Bluetooth mode should now be shown on the LED indicator screen.

    The above Bluetooth mode instructions are intended for Bluetooth enabled printers by Star Micronics, specifically the SM-T300 series.

    If your printer doesn't match these specifications the Bluetooth Mode selection process maybe different. Please consult the hardware manufacturers manuals for instructions.

  2. Make sure Bluetooth is enabled on your device.

  3. Pair/link your printer and phone together.

  4. Next go into the ParkAdmin for Android app.

  5. Select System Settings.

  6. Select Printer.

  7. Confirm your Bluetooth printer has been select.

  8. Done!

There is no content with the specified labels

OperationsCommander parking and security management platform
  • No labels