Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Next »

Step-by-step guide

  1. Make sure printer is in Bluetooth Mode. This is done by powering on the unit (hold the power button down for 3 seconds until the printer beeps). If "Bluetooth mode" isn't shown on the LED indicator please hold down both the power and feed buttons for 5 seconds at which point the printer will enter mode selection. From this point click feed or power to cycle the mode. Once you have Bluetooth mode selected hold down the power and feed buttons for another 5 seconds to enable that mode. Bluetooth mode should now be shown on the LED indicator screen.

    The above Bluetooth mode instructions are intended for Bluetooth enabled printers by Star Micronics, specifically the SM-T300 series.

    If your printer doesn't match these specifications the Bluetooth Mode selection process maybe different. Please consult the hardware manufacturers manuals for instructions.

  2. Make sure Bluetooth is enabled on your device. Tap on Bluetooth to get more options. Select the option to Search for Devices. Your printer should appear in the listing. 

  3. Tap on the printer to pair/link your printer and phone together. Type in the printer PIN.

    If asked for the Printer Pin the default Bluetooth PIN is usually 1234 Otherwise please consult your printer manual.

  4. Next go into the ParkAdmin for Android app.

  5. Select System Settings.

  6. Select Printer.

  7. Confirm your Bluetooth printer has been select.

  8. Done!
OperationsCommander parking and security management platform
  • No labels